Dapeng Town Industrial Park, Tongshan District, Xuzhou City, Jiangsu Province, China
For the space frame structure subjected to high temperature and strong corrosion and fire protection requirements, or the floor space frame structure subjected to dynamic loads, it shall meet the requirements of the current relevant special codes or regulations. The fatigue strength and structure of the space frame structure that directly bear the load of the suspended crane of the intermediate or heavy duty system and need to be checked for fatigue shall be determined by special tests.
The selection of the space frame frame should comprehensively consider material supply, construction conditions and production and installation methods to achieve good technical and economic results. The rods and nodes in the space frame structure should be reduced in size and type to facilitate production and installation.
In the design and construction of space frame roof steel structure, this regulation is specially formulated to achieve advanced technology, economical rationality, safety and application, and quality assurance.
This regulation is applicable to the flat space frame structure (referred to as space frame structure) of roofs and floors of industrial and civil buildings. The roof span should not be greater than 120m, and the floor span should not be greater than 40m.
For a space frame company that is competitive in the market, it is necessary to continuously improve production technology to reduce investment costs. In the production of stainless steel space frames, steel structure space frames, light steel space frames and other products, it is very important to change the production mode. Therefore, for space frame companies at present, it is necessary to continuously change in the process of facing market changes to enhance a higher level of competitive advantage.
In terms of reducing production costs, the space frame company first made a breakthrough in production technology. At present, for some space frame application fields, the performance requirements for space frames are getting higher and higher. Whether it is the product’s compressive resistance, shock resistance, environmental protection and corrosion resistance, users of the mesh frame hope that the products they buy can meet the requirements of their use. For space frame manufacturers, it is necessary to increase the investment of technical force on the basis of the original production, improve the performance of the product, and reduce the cost of input in the process, so that an enterprise can occupy a certain position in the market.
