How to choose space frame bolt balls

Today, Xuzhou SAFS Steel Structure Engineering Co., Ltd. will introduce to you the selection method of steel structure space frame bolt balls, hoping to help you.

The first method: According to the number of the bolt ball in the installation drawing of the space frame, and then correspond to the number on the bolt ball on the construction site one by one, and select it. (Common and simple method).

Another is that because the space frame number is not clear, the following method should be taken to select the bolt ball. (This method is suitable for individual selection, not suitable for batch processing) This needs to be seen from the space frame construction drawings.

When processing bolt balls, the bolt balls will be marked and classified before they leave the factory and go to the construction site for assembly.

Before installing the bolt ball, we need to do the following things.

1. The space frame installation drawings should be complete and with bolt ball drawings.
2. On-site classification. All bolt balls are placed as required.
3. Assemble the horizontal rods and bolt holes first. This is actually easy to identify. As long as the bolt ball is placed, and the corresponding bolt hole is found on the drawing and kept on a horizontal line, this horizontal line bolt hole is what you are looking for.
4. Other bolt holes can be quickly confirmed.

The bolt ball is relatively technical in the installation of the entire space frame, and it is also a relatively error-prone product.

Xuzhou SAFS Steel Structure Engineering Co., Ltd.’s introduction to the selection of space frame bolt balls is here. If you have any questions, you can leave a message below.